BKBLP - G-N METAL ASSEMBLY PASTE

  • MSDS: BKBLP
  • Manufacturer: DOW CORNING CORP
  • Product Name: G-N METAL ASSEMBLY PASTE
  • National Stock Number: 9150-00-823-8049
Product Identification

Product ID:G-N METAL ASSEMBLY PASTE
MSDS Date:11/22/1993
FSC:9150
NIIN:00-823-8049
Kit Part:Y
MSDS Number: BKBLP

Responsible Party
DOW CORNING CORP
SOUTH SAGINAW RD
MIDAND, MI 48686
US

Emergency Phone: 517-496-5900

Info Phone: 517-496-6000

Preparer: PRODUCT SAFETY

Cage: 5D028

Contractor
INLAND PACKAGING INC
644 ELIZABETHTOWN, KY 42701-9804 US

Telephone: 502-737-6757

Cage: 66172

Ingredients

MINERAL OIL

CAS: 8042-47-5

RTECS: PY8047000

Fraction By Weight: 48%

OSHA PEL 5 MG/M3 OIL MIST

ACGIH TLV: 5 MG/M3 OIL MIST


MOLYBDENUM DISULFIDE

CAS: 1317-33-5

RTECS: QA4697000

Fraction By Weight: 17%


SILICA GEL

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1%


ZINC PYROPHOSPHATE

CAS: 7446-26-6

Fraction By Weight: 14%


CALCIUM PHOSPHATE

CAS: 7758-87-4

Fraction By Weight: 13%


ETHYLENE-BIS-STEARAMIDE

CAS: 110-30-5

Fraction By Weight: 3%


TRIALUMINUM PHOSPHATE

CAS: 13530-50-2

Fraction By Weight: 2%


POLYISOBUTYLENE

CAS: 9003-27-4

RTECS: UD1010000

Fraction By Weight: N/GIVEN

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:DIRECT CONTACT IRRIT SLIGHTLY
W/REDNESS & SWELLING. SKIN:REPEATED PROLONGED EXPOSURES MAY IRRIT.
INHAL:IRRIT RESPIRATORY PASSAGES VERY SLIGHTLY. INGEST:SMALL AMTS
TRANSFERRED TO MOUTH BY FINGERS DURING USE SHOULD NOT INJURE.
SWALLOWING LG AMT MAY CAUSE DIGESTIVE DISCOMFORT. NO KNOWN ADVERSE
CHRONIC HEALTH EFFECTS.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYES: SLIGHT IRRITATION WITH REDNESS AND
SWELLING. SKIN: IRRITATION. INHALATION: SLIGHT IRRITATION OF
RESPIRATORY TRACT. INGESTION: DIGESTIVE DISCOMFORT.
Medical Cond Aggravated by Exposure:MAY ENHANCE ALLERGIC CONDITIONS ON
CERTAIN PEOPLE. NO KNOWN MEDICAL CONDITIONS THAT MIGHT BE
AGGRAVATED BY EXPOSURE TO THIS PRODUCT. NO INJURY FROM DUST SHOULD
OCCUR DURING REASONABLE USE.

First Aid

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. SKIN: WIPE OFF AND
FLUSH WITH WATER. WASH WITH MILD SOAP SOLUTION OR WATERLESS SKIN
CLEANER. INHALATION: NO FIRST AID SHOULD BE NEEDED. INGESTION: NO
FIRST AID SHOULD BE NEEDED.

Fire Fighting

Flash Point Method:OC
Flash Point:>250F,>121C
Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING
CHEMICALS.
Unusual Fire/Explosion Hazard:HAZARDOUS SULFUR OXIDES FORMED.

Accidental Release

Spill Release Procedures:REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES. USE PROPER EYE PROTECTION
SAFETY GLASSES AS A MINIMUM. NO RESP PROTECTION SHOULD BE NEEDED.
WASH HANDS AFTER HANDLING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE REASONABLE CARE AND CAUTION IN
HANDLING AND STORAGE OF THIS PRODUCT.
Other Precautions:NONE KNOWN TO DOW CORNING.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:MECHANICAL (GENERAL) IS RECOMMENDED. LOCAL EXHAUST SHOULD
NOT BE NEEDED.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE NORMALLY REQUIRED.AT LEVEATED TEMPS OR
AEROSOL/SPRAY APPLICATIONS MAY REQUIRED ADDED PRECAUTIONS.
Work Hygienic Practices:WASH @ MEALTIME @ END OF SHIFT IS ADEQUATE.GOOD
PRACTICE REQURES THAT GROSS AMTS BE REMOVED FROM SKIN ASAP EI
EAT/SMOKE.
Supplemental Safety and Health
CONTAINS ZINC COMPOUND (14% BY WT)-SUBJECT TO REPORTING REQMTS OF
SEC313 EPCRA OF 1986 & 40CFR372.

Chemical Properties

HCC:V7
Vapor Pres:<5
Spec Gravity:1.38
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:BLACK, PASTE-LIKE. VERY LITTLE ODOR.
Percent Volatiles by Volume:<5%

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A REACTION.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:METAL OXIDES, SULFUR OXIDES, SILICON
DIOXIDE, CO2, TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS
INCLUDES FORMALDEHYDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DOW CORNING SUGGESTS THAT ALL LOCAL, STATE AND
FEDERAL CONCERNING HEALTH & POLLUTION BE REVIEWED TO DETERMINE
APPROVED DISPOSAL PROCEDURES. CONTACT DOW CORNING IF THERE ARE ANY
DISPOSAL QUESTIONS. CON TAINS NO INGRED SUBJECT TO DOT/EPA
CERCLA/SARA REG

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.